Permabond 240

Permabond 240 is a high viscosity product for large gap applications. It’s ideal for porous substrates, is fast setting and suitable for plastics, rubber and metals.

Permbond 240 is a single component cyanoacrylate adhesive. It will polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. This develops strong bonds extremely fast and on a variety of materials. These properties make Permabond cyanoacrylates the ideal adhesives for high speed production lines.



Features & Benefits of Permabond 240

  • Rapid development of high strength
  • Ease of use – no mixing or heat cure
  • Bonds most materials
  • 100% reactive, no solvents
  • Approved to MIL-A-46050C Type II Class 3 (existing designs)

Directions for Use

  1. Apply the adhesive sparingly to one surface.
  2. Bring the components together quickly and correctly aligned.
  3. Apply sufficient pressure to ensure the adhesive spreads into a thin film.
  4. Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
  5. Any surplus adhesive can be removed with Permabond CA solvent, nitromethane or acetone.

For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with our cyanoacrylate activator.

Find your Perfect Adhesive Here